Thanks to its excellent compaction force combined with a quick forward and reverse travel direction, the DPU4045 offers a high level of productivity. It is equipped with a Yanmar diesel engine and is an all-rounder for all job sites where high demands are placed on the performance efficiency of a unit. In addition, it offers excellent characteristics in terms of service life and operating comfort. Optimal application areas are the compaction of frost coverings and subbases in street, path and parking lot construction as well as backfilling buildings. Thanks to a frequency of 69 Hz, the DPU4045 is universally applicable and even reliably compacts medium-weight interlocking paving stones.

The new center pole reduces hand-arm vibration (HAV) to a minimum and therefore offers a high level of comfort at full compaction performance. No restriction for operation time and no documentation effort.
A dead man function prevents the operator from being trapped between the equipment and an object when working in reverse.
All maintenance points are quickly and easily accessible. Extensive comfort functions: low oil shutdown, self-tightening V-belt, maintenance-free alternator, pull-out external jump-start connection accessible from outside.
A large dimensioned Yanmar diesel engine offers sufficient power reserves. It ensures efficiency and long service life.
New positioning of the operator's controls in a sturdy housing better protection against dirt and damage.

Very low hand-arm vibration (HAV)
The specially designed center pole from Wacker Neuson generates very low hand-arm vibration (HAV) below 2.5 m/s².

This allows for continuous operation all day long without impairment and without hazard to the end user.

All documentation requirements are omitted if an operator only works with equipment that has acceleration values below 2.5 m/s².

Intuitive control handle design
The speed is regulated and the travel direction is changed through the forward and backward movement of the handle.

The control panel
Built to be sturdy and therefore well-protected against dirt and moisture.
All functions and displays in view and easily accessible: Ignition lock, operating light, charge control lamp, jump start pin, operating hour meter (optional).

Jump start pin
Very easy to access for easy charging of the battery, for example after a winter break.
No risk of dirt accumulation. The jump start pin is protected and is only pulled out if necessary.

Low hand-arm vibrations (HAV)
Low hand-arm vibrations (HAV) are essential, especially during long-time application. Our reversible vibratory plates can be used without a time restriction, largely even without a documentation requirement.

Operating data

Operating weight 376 kg
Centrifugal force 40 kN
Base plate size (W x L) 440 x 900 mm
Base plate thickness 12 mm
Height (without center pole) 764 mm
Operating width (with extension plate) 600 mm
Frequency 69 Hz
Hand-arm vibrations < 2.5 m/s²
Advance travel max. (dependent on soil and environmental impacts) 24 m/min
Surface capacity max. (dependent on soil and environmental impacts) 870 m²/h
Transport height 1,514 mm
Transport length 1,048 mm
Transport width 780 mm
Engine / Motor
Engine / Motor type Air-cooled single cylinder four-cycle diesel engine
Engine / Motor manufacturer Yanmar
Engine / Motor L70N
Displacement 320 cm³
Engine performance max. (DIN ISO 3046 IFN) 4.5 kW
at rpm 3,000 rpm
Operating performance max. (DIN ISO 3046 IFN) 4.3 kW
at rpm 3,000 rpm
Fuel consumption 1.4 l/h
Fuel tank capacity 3.3 l
Power transmission From the drive motor via the centrifugal clutch and V-belt to the exciter
Fuel type Diesel

Serviced and ready for work

LIFTEK AUSTRALIA CAN DELIVERY AUSTRALIA WIDE

WE ARE FAMILY OWNED AND OPERATED, BASED IN GRIFFITH & WAGGA WAGGA